All you need to know about Car Replacement Emission Diverter Valves – May 2022 Edition

Click to rate this post!
[Total: 0 Average: 0]

Looking to find the best Car Replacement Emission Diverter Valves?

We researched 19 Car Replacement Emission Diverter Valves, tested 12, and we have done 24 hours of research. The best Car Replacement Emission Diverter Valves doesn’t have to be complicated to be great. Our first pick is exactly that. No more, no less. It also costs less than any other products we tested.

The best

No. 1
KraftWerkTurbo 007 Diverter Valve fits Audi VW Porsche Saab Ford Renault
32 Consomer Reviews
KraftWerkTurbo 007 Diverter Valve fits Audi VW Porsche Saab Ford Renault
  • KraftwerkTurbo Original Replacement for weak stock valve
  • Complete kit with springs to adapt to boost levels, washers for fine tuning, vacuum hose, clamps
  • Easy DIY installation
  • Quality Product; Tested and installed on all KraftWerkTurbo modified cars and tunes

Intro

Everything you need to know about Car Replacement Emission Diverter Valves before getting yourself one! Learn about this product comparison that we made especially for you. You have a wide selection to choose from when you’re looking for a Car Replacement Emission Diverter Valves (size, brand, product’s solidity and reliability…). That’s why we created, for this type of item, a ranking based on the best value for money according to various brands and prices. We aim to help you find the Car Replacement Emission Diverter Valves that will meet your expectations and budget. You can learn about some presentation and/or functioning details thanks to Amazon customers who review the products featured on this comparison. This top 10 is regularly reworked to remain up-to-date and useful to you. Let’s find the Car Replacement Emission Diverter Valves that is just right for you!

Our picks

No. 1
KraftWerkTurbo 007 Diverter Valve fits Audi VW Porsche Saab Ford Renault
32 Consomer Reviews
KraftWerkTurbo 007 Diverter Valve fits Audi VW Porsche Saab Ford Renault
  • KraftwerkTurbo Original Replacement for weak stock valve
  • Complete kit with springs to adapt to boost levels, washers for fine tuning, vacuum hose, clamps
  • Easy DIY installation
  • Quality Product; Tested and installed on all KraftWerkTurbo modified cars and tunes
SaleNo. 2
GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
  • 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
  • 6 different Push pin rivet for many brand vehicles.
  • Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
  • Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
  • PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover
No. 3
Vapor Canister Purge Valve - Replaces CX-2409, AU5Z9C915B, AU5Z-9C915-B, 911-222 - Compatible with Ford, Mazda, Lincoln, Mercury - Edge, Explorer, Escape, F150, Focus, Fusion, Mustang, Taurus, MKX
  • Replacement Evaporative Emissions Canister Purge Valve - A critical component of the EVAP system, the canister purge valve regulates the flow of fuel vapours being released for the engine to burn instead of the vapours just being released into the atmosphere. When your canister purge valve is bad it may trigger a CEL (Check Engine Light) with a code.
  • Compatible Replacement for Ford, Mazda, Lincoln & Mercury Vehicles - 2011-2018 Edge 3.5L | 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Ford Escape 2.5L | 2011-2019 Explorer 3.5L | 2011-2017 F-150 5.0L | 2015-2017 F-150 3.5L | 2013-2019 F-250 Super Duty 6.2L | 2013-2019 F-350 Super Duty 6.2L | 2010-2019 Fusion 2.5L | 2013-2019 Flex 3.5L | 2011-2017 Mustang 5.0L | 2013-2019 Taurus 3.5L | & more. See below for a full vehicle list.
  • Replaces Part# CX-2409, CP758, CX2383, AU5Z9C915B, 9C915, AU5A-9G866-AB, 9U5Z9C915H, 9U5Z-9C915-H, 911-222, AU5Z9C915A, AU5Z9C915B commonly found on popular 2.0L, 2.5L, 3.0L, 3.5L, 3.7L, 5.0L, 5.2L, 5.4, 5.8L, 6.2L models with year models 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19. The canister purge evap valve can easily be located inside the engine bay usually beside the throttle body. Please check the fitment and part number before ordering.
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for your factory evap canister purge valve solenoid manufactured by AA Ignition. If you are experiencing rough idle, hard to start especially after fueling, poor fuel economy and the CEL with code P0496 then you may have a problem with your canister purge valve.
  • Lifetime Warranty - This canister purge valve solenoid comes complete with a lifetime warranty. If the part ever fail on your Edge, Explorer, Flex, F-150, Police Interceptor Utility, Transit-150, Ford Transit-250, Transit-350 HD, Mustang, MKT or F-350 Super Duty simply contact us for a replacement. Save time and money by purchasing this part from AA Ignition.

Why you should trust us

This guide represents more than 10 years of experience in researching, testing, and writing about many subject. Our people are experts in all of their fields.
We alors spent 24 hours reading any article we could find on the internet and all the customer reviews at various retailer sites such as those of Amazon, Home Depot or Wallmart. We found many website that was a valuable resource with involved buying guides and detailed Car Replacement Emission Diverter Valves information.
As for me, I’m very familiar with the Car Replacement Emission Diverter Valves since I got it from 4 years.

Top 10

No. 1
KraftWerkTurbo 007 Diverter Valve fits Audi VW Porsche Saab Ford Renault
32 Consomer Reviews
KraftWerkTurbo 007 Diverter Valve fits Audi VW Porsche Saab Ford Renault
  • KraftwerkTurbo Original Replacement for weak stock valve
  • Complete kit with springs to adapt to boost levels, washers for fine tuning, vacuum hose, clamps
  • Easy DIY installation
  • Quality Product; Tested and installed on all KraftWerkTurbo modified cars and tunes
SaleNo. 2
GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
  • 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
  • 6 different Push pin rivet for many brand vehicles.
  • Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
  • Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
  • PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover
No. 3
Vapor Canister Purge Valve - Replaces CX-2409, AU5Z9C915B, AU5Z-9C915-B, 911-222 - Compatible with Ford, Mazda, Lincoln, Mercury - Edge, Explorer, Escape, F150, Focus, Fusion, Mustang, Taurus, MKX
  • Replacement Evaporative Emissions Canister Purge Valve - A critical component of the EVAP system, the canister purge valve regulates the flow of fuel vapours being released for the engine to burn instead of the vapours just being released into the atmosphere. When your canister purge valve is bad it may trigger a CEL (Check Engine Light) with a code.
  • Compatible Replacement for Ford, Mazda, Lincoln & Mercury Vehicles - 2011-2018 Edge 3.5L | 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Ford Escape 2.5L | 2011-2019 Explorer 3.5L | 2011-2017 F-150 5.0L | 2015-2017 F-150 3.5L | 2013-2019 F-250 Super Duty 6.2L | 2013-2019 F-350 Super Duty 6.2L | 2010-2019 Fusion 2.5L | 2013-2019 Flex 3.5L | 2011-2017 Mustang 5.0L | 2013-2019 Taurus 3.5L | & more. See below for a full vehicle list.
  • Replaces Part# CX-2409, CP758, CX2383, AU5Z9C915B, 9C915, AU5A-9G866-AB, 9U5Z9C915H, 9U5Z-9C915-H, 911-222, AU5Z9C915A, AU5Z9C915B commonly found on popular 2.0L, 2.5L, 3.0L, 3.5L, 3.7L, 5.0L, 5.2L, 5.4, 5.8L, 6.2L models with year models 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19. The canister purge evap valve can easily be located inside the engine bay usually beside the throttle body. Please check the fitment and part number before ordering.
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for your factory evap canister purge valve solenoid manufactured by AA Ignition. If you are experiencing rough idle, hard to start especially after fueling, poor fuel economy and the CEL with code P0496 then you may have a problem with your canister purge valve.
  • Lifetime Warranty - This canister purge valve solenoid comes complete with a lifetime warranty. If the part ever fail on your Edge, Explorer, Flex, F-150, Police Interceptor Utility, Transit-150, Ford Transit-250, Transit-350 HD, Mustang, MKT or F-350 Super Duty simply contact us for a replacement. Save time and money by purchasing this part from AA Ignition.
No. 4
Notonparts 73231G01 48V 4 Terminal 200 Amp Starter Solenoid 1018836-01 586-120111 Compatible with Yamaha G19 G22 G23 G27 G29 EZGO 950 Series Titan XI-875 Electric Club Car DS & Precedent Electric
13 Consomer Reviews
Notonparts 73231G01 48V 4 Terminal 200 Amp Starter Solenoid 1018836-01 586-120111 Compatible with Yamaha G19 G22 G23 G27 G29 EZGO 950 Series Titan XI-875 Electric Club Car DS & Precedent Electric
  • Part Number: 73231G01 586-120111-3 1018836-01 586-120111 JR1-H1950-00 586-907S1 586-907 SBJ4801 15-553 435-362
  • Solenoid Compatible with Yamaha G19 1996-2001 G22 G23 G27 G29 2002-2014
  • Solenoid Compatible with EZGO Shuttle 2 to 6 Passenger Series 950 Series Titan XI-875 Electric 1995 and Newer
  • Solenoid Compatible with Club Car DS & Precedent Electric 1995-1998 DS & Precedent Power Drive 1996-1997
  • Good Replacement: Manufactured by a Professional Manufacturer, Original Factory Standard. Advanced Design and High-Performance Provide Better Experience and Longer Service Life
No. 5
GOOACC - GRC-47 Universal Plastic Fender Clips,200 Pcs Push Bumper Fastener Rivet Clips with 6 Size Auto Body Retainer Clips Bumpers,Car Fender Replacement for GM, Ford & Ch
  • UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 6 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
  • SAVE TIME AND MONEY - You can find 200PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners.
  • HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
  • MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
  • Package Include: Includes 30 pcs 6mm Clips , 30 pcs 7mm Clips, 30 pcs 8mm Clips(YT: 1362), 50 pcs 8mm Push Clips(YT: 3143), 30 pcs 9mm Clips, 30 pcs 10mm Clips.
No. 6
ACDelco GM Original Equipment 214-1680 Vapor Canister Purge Valve
  • GM recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
No. 7
GM Genuine Parts 12639108 Secondary Air Injection Check Valve
49 Consomer Reviews
GM Genuine Parts 12639108 Secondary Air Injection Check Valve
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
No. 8
BBTO 5 Feet Length High Temperature Silicone Vacuum Tubing Hose for Multiple Use (Black,1/8 Inch, 3 mm)
  • Inner diameter details: 1/ 8 inch (3 mm); Length: 5 feet/ 1.5 meters; Wall thickness: 1/ 12 inch (2 mm)
  • Quality material: the product is made of high temperature resistant silicone material, which has good plasticity, can be bent at will, corrosion resistance and can be applied for a long time
  • Working temperature: -40 - 110℃ (-40 - 230℉); Working pressure: 0.3 to 0.9 MPA
  • Convenient to use: this silicone vacuum tubing hose is easy to use and can be easily cut if the length is too long
  • Warming tip: please confirm that this tubing hose is consistent with the size you need before purchasing
No. 9
ACDelco GM Original Equipment 214-2317 Vapor Canister Purge Valve
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
No. 10
Irritrol R811-24VACG Replacement Solenoid
  • Captive hex plunger feature
  • Male threaded for easy installation
  • 24Vac , 40 amp inrush, 20 amp holding
  • Package Dimension : 1.778 centimeters L x 6.096 centimeters W x 7.62 centimeters H

How we tested

We search all the field to find the best Car Replacement Emission Diverter Valves and all the type for it and get the best alternatives, priced decently, and easy to use. After that we tested all the main parameters we use : These things can separate the great Car Replacement Emission Diverter Valves from the good.

  • Easy To use
  • Options
  • Quality
  • Longevity

How we picked

We search for all the field to find the best Car Replacement Emission Diverter Valves and all the type for it and get the best alternatives, priced decently, and easy to use.
The main parameters we use : These things can separate the bad Car Replacement Emission Diverter Valves from the good.

  • Price
  • Easy To use
  • Customer reviews
  • Quality
  • Longevity
  • Dimensions

Current Offers

SaleNo. 1
GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
  • 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
  • 6 different Push pin rivet for many brand vehicles.
  • Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
  • Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
  • PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover

Conclusion

As you may have seen, the best Car Replacement Emission Diverter Valves are not always the most expensive. We hope this top 10 has been a useful tool in your choice of Car Replacement Emission Diverter Valves. Your comments are welcome. This comparison is regularly updated, so you will always find the latest products on the market in this ranking.

Last update on 2022-05-26 at 09:02 / Affiliate links / Images from Amazon Product Advertising API